Dangers of the use of electrolysis in the cleaning the waste-water

Dangers of the use of electrolysis in the cleaning the waste-water

Sometimes has claimed, that electrolysis would help to clean polluted water. The thing, why some people believe in this solution is that the electrolysis would deliver free oxygen in the water, and oxygen kills anaerobic bacteria. But if we would make that process without necessary sharpness and using the perfect, suitable tools for the preprocessing of the water, we could cause a very bad ecological catastrophe.

In this case, the electrolysis could easily use for creating oxygen, which kills anaerobic bacteria. But it should happen in a separated chamber, where is conducted the clean or salted water. That eliminates the expensive cleaning process of the wastewater, where every drop of oil and other polymers must be removed before electricity is conducted to that water. If there is oil or some other carbon polymers, that thing causes forming dangerous chemicals, which are called polychlorinated hydrocarbons, which are the deadliest chemicals on Earth. 

The problem with the use of electrolysis in the water cleaning process is quite dangerous because this process could form a chemical combination, which is known as dioxin, which is part of the so-called DLC ( dioxin-like compounds) highly toxic environmental POPs (Persistent Organic Pollutants) what type of chemical combinations are extremely poisonous. The dioxin is forming, when oil is getting in the electrolytic process, and this thing is causing that this super-strong poison is forming in electric components like transformers, which contains oil. The dioxin is cell poison, which is causing death in a very low dose. 

https://en.wikipedia.org/wiki/Dioxins_and_dioxin-like_compounds

Many people misconnect DLCs with the PCB, which is another group of poisons. But actually, PCB is the acronym for polychlorinated biphenyl, which is a little bit different than DLC. 

https://en.wikipedia.org/wiki/Polychlorinated_biphenyl

So in that process, all oils and other liquid polymers must be removed from the water. After that, the polluted water could send to the electrolysis, if we want to use that thing. Electrolysis is, of course, an effective way to produce the oxygen, and it can use effectively in a separated tank, where the electrolysis would create oxygen, and if the water is salted it can also create chlorine, what will clean the polluted water as it does in the normal swimming pool. 

This is one version of chemical cleaning, where the polluted water, what comes from the sewer system would clean from the bad-smelling and harmful bacteria. The thing is that processing wastewater is one of the most important things in environmental protection. The thing is that driving oxygen in the wastewater would make life on anaerobic bacteria impossible, but if we would use some method, we must make sure, that there would not be becoming bigger problems. 

The water powered engines part II

The water powered engines part II

1. Use of alkaline metals for separating hydrogen from oxygen is impractical

Water powered engines can be done by using lithium or some other alkaline metals, what is dropped to the water. This causes the creation of the hydrogen, which can be used in the normal combustion engines.

This system is quite impractical, and alkaline metals are very difficult to handle because of the danger of explosion. But as we all know, the alkali metals are an interesting part of this technology, where water molecules are separated to oxygen and hydrogen.  Electrolysis can make hybrid cars more capable than ever before

Also, there is a possibility to equip hybrids cars with electrolysis chambers, where the hydrogen is separated from oxygen by using electricity. Those cars can use solar panels, normal electricity, what is taken from the plug, and also the electrolysis system can connect to the system, where the hybrid cars are loading their batteries.

2. Off-road vehicles can equip with turbines

The system can operate with a normal combustion engine, or it can use fuel cells. That system would feed the electric motors with electricity. And in wildest scenarios, some off-road vehicles would equip with hydrogen power turbines, which will give them extra power.

If we think the hydrogen as the fuel of turbines, that thing is, of course, non-polluting fuel, which is quite easy to make. At the land, the hydrogen can be produced by the portable geothermic power station. In the portable geothermic energy is taken from the ground by drilling the hole by using laser-ray, and then the element just drop in that hole.

3. Hydrogen can create by using mobile systems.

This makes possible to make electricity by using the system, what is the size of caravan. The element is quite a small size, and it is in the nose of a thin tube, which is made to maintain the heat of the water. Or if the system uses alcohol and acetone would the pressure to the turbines raise even more. And the temperature must rise only about 100 degrees Celsius.

The rise of pressure would depend, what liquid will be used. If the used liquid has a low boiling point, the pressure in the closed cycle system would rise more than if the system uses water. When the liquid is passing the turbine, it will go through the heat exchanger, and then it will send back to the element, where it is reheated. And the closed cycle means that the liquid needs no refill.

4. Solar generators can operate with the same principle. 

One version of this kind of systems is solar generators, what are actually the combination of geothermic systems and solar panels. In those systems, what looks a little bit like the cooling systems of freezers, the sun is heating the liquid, what is rounding in the tubes, and the steam would rotate the turbine wheel.

This system can use every liquid, and the only one thing is needed, the system must boil that liquid. So there can be used the water, alcohol, acetone or some cold gas, what will heathen by sunlight, and if we would want this system work in very low temperature, we must use the liquid gas for making turbine rotating.

5. The limits for low-temperature use of solar generators is that the gases, what boils in the low temperature are mostly high-inflammable. 

The limits of this system are, that the low boiling liquids are mostly very high inflammable. But let's go back to the hydrogen creation process. The needed thing is electricity and the ships can produce hydrogen by using electricity, which is taken from the generator, which rotates with capillary water, which is injected through the turbine wheel.

But there is a possibility to use wind energy, or the entire ship can be covered by solar panels. hydrogen itself is suitable for the turbines, and it can use in every vehicle, where is turbine engines. That means that turbine powered vehicles can burn hydrogen without any modification.

The water powered engines

The water powered engines

The pump of the hydraulic engine can be replaced with a vacuum chamber.

There have been made the research with the hydraulic motor systems what bases two chambers. Another chamber is filled with water and another is a vacuum. When the hydraulic liquid travels through the motor, what is between those chambers, it will put the engine run. Then the liquid would pump back to another chamber, and the vacuum chamber would pump empty again. The pump system needs of course electricity, which can be created by using a capillary tube, or it can be loaded from the electric plug.

Sometimes inventors have introduced hydraulic motors, which are suitable for cars. The hydraulic motor itself doesn't need fuel, because the principle of the hydraulic motor is that the hydraulic liquid would travel through the motor, and makes the parts moving. But the pump of that system needs fuel or electricity.

The underwater hydraulic engine vehicle, what doesn't need external fuel can look little bit old-time locomotive. 

In the world is many strange inventions, and one of them is a water-powered engine. The "cousin" of that engine is the hydraulic engine, what can act without external fuel. There have been made tests with hydraulic motors, what have a capillary pipe, and the water would travel through that thing and make the underwater vehicle move.

Sometimes there have been tested this technology in automobiles, and the system works that the water is conducted to the tank, what is far above the vehicle, and that suck effect causes that the motor would run the vehicle. There have been actually many versions of this idea, and one is basing two tanks, what are in both sides of the engine. In another tank is a vacuum, and another is water, and then the water would travel between those tanks through the motor what can be the piston or turbine engine. And that would make the vehicle moving.

The hybrid car can equip with electrolysis chamber

In the conventional versions, the electricity what would be created by solar panels or induction generators, what is installed in the wheels, and what can use as motors would create electricity for electrolysis, what will separate hydrogen from the water. This vehicle is hydrogen motored hybrid version of the electric car, and the electricity can also take from the normal electric network.

The idea is the same as normal hybrid cars, but the hydrocarbon fuel replaced by hydrogen. And that would make possible to use combustion engine in this vehicle, what would leave no pollution because when the hydrogen is burning, the exhaust gas contains only water.